Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, aged to 2026 using compounded market movement. State selections show BLS state-level figures where published. Actual pay varies with experience, industry, and organization size.
Maintenance Workers, Machinery salary in New Hampshire
The average Maintenance Workers, Machinery salary in New Hampshire is $73,000 per year on WePayFairly's 2026 basis. The 25th-to-75th-percentile range is $61,500 to $87,000. Based on BLS state wage data, aged to 2026.
The following occupation, experience, industry and career information describes the role nationally. For New Hampshire pay, use the state figures above and the state salary questions below.
Total cash compensation
Base salary plus target annual bonus. Target bonus opportunity scales with role level, so a higher base carries a higher target percentage.
Base salary
$67,000
National baseline
Target bonus
$7,000
10.2% of base
Total target cash
$74,000
Base plus target bonus
Bonus percentiles:25th$4,00050th$7,00075th$11,500
Long-term incentive is not shown for this role. Equity awards are only disclosed publicly for the named executive officers of public companies, so no market figure exists for most jobs. See executive pay disclosures.
Typical entry preparation: Post-Secondary Certificate and up to 1 year of related work experience, per O*NET occupational data. Advancement typically requires additional years in role.
Dismantle machines and remove parts for repair, using hand tools, chain falls, jacks, cranes, or hoists.
Reassemble machines after the completion of repair or maintenance work.
Record production, repair, and machine maintenance information.
Lubricate or apply adhesives or other materials to machines, machine parts, or other equipment according to specified procedures.
Install, replace, or change machine parts and attachments, according to production specifications.
Top skills:TroubleshootingRepairingOperations MonitoringEquipment MaintenanceOperation and ControlQuality Control Analysis
Includes information from O*NET OnLine by the U.S. Department of Labor, Employment and Training Administration (CC BY 4.0).
Maintenance Workers, Machinery pay by experience level
Entry level$43,500
Typical starting pay (about the 10th percentile)
Early career$50,500
A few years in (about the 25th percentile)
Experienced$63,000
Mid-career median pay
Senior$78,000
Seasoned professionals (about the 75th percentile)
Top earners$91,500
Highest earners (about the 90th percentile)
Experience tiers are derived from the BLS wage percentile distribution for this occupation, aged to 2026. Actual pay varies by employer, location, and specialization.
Job outlook
-2.8%
projected change in jobs, 2024–2034
4,800
projected openings per year
Declining
Source: U.S. Bureau of Labor Statistics, Employment Projections program (2024–2034). Openings include growth and replacement needs.
Maintenance Workers, Machinery salary by industry
Food Manufacturing
5,300 workers
$62,500
Transportation Equipment Manufacturing
3,350 workers
$65,500
Merchant Wholesalers, Durable Goods
3,090 workers
$62,000
Fabricated Metal Product Manufacturing
2,730 workers
$63,000
Plastics and Rubber Products Manufacturing
2,560 workers
$64,500
Chemical Manufacturing
2,530 workers
$74,500
Primary Metal Manufacturing
2,480 workers
$63,500
Warehousing and Storage
2,280 workers
$60,000
Warehousing and Storage
2,280 workers
$60,000
Plastics Product Manufacturing
2,090 workers
$64,500
National sector-level figures, BLS OEWS May 2025, aged to 2026.
Who works in this role
About 67,000 people held this occupation in the United States in 2025.
Women
0.6%
White
69.4%
Black or African American
14.6%
Asian
4.5%
Hispanic or Latino
15.3%
Race categories and Hispanic or Latino ethnicity overlap, so shares can sum to more than 100 percent. Figures describe this occupation across the national workforce, not any single employer. Source: U.S. Bureau of Labor Statistics, Current Population Survey, Annual Averages, Table 11, 2025.
Pay trend
National median annual wage, 2020 to 2025: $50,100 to $60,850.
+21.5% over this period
Medians as published each May in the BLS Occupational Employment and Wage Statistics national estimates. Nominal dollars, not adjusted for inflation. Source: U.S. Bureau of Labor Statistics, OEWS.
Pay by experience level
How annual pay for this occupation spreads from newcomers to the highest paid, aged to 2026.
Entry10th percentile
$43,500
Early career25th percentile
$50,500
Median50th percentile
$63,000
Experienced75th percentile
$78,000
Top earners90th percentile
$91,500
Bands are the 10th, 25th, 50th, 75th, and 90th percentile annual wages for this occupation nationally. Percentiles reflect the full mix of tenure, employer, and location, so they approximate but do not equal years of experience. Source: U.S. Bureau of Labor Statistics, OEWS national estimates.
Where this job pays most
Top-paying states for this occupation, average annual wage aged to 2026.
State averages for this occupation from the BLS OEWS state estimates. Cost of living differs by state; a higher wage does not always mean more buying power.
The abilities employers and analysts most associate with this occupation.
TroubleshootingRepairingOperations MonitoringEquipment MaintenanceOperation and ControlQuality Control Analysis
Source: U.S. Department of Labor, O*NET occupational database.
Typical duties and FLSA status
Core duties
Dismantle machines and remove parts for repair, using hand tools, chain falls, jacks, cranes, or hoists.
Reassemble machines after the completion of repair or maintenance work.
Record production, repair, and machine maintenance information.
Lubricate or apply adhesives or other materials to machines, machine parts, or other equipment according to specified procedures.
Install, replace, or change machine parts and attachments, according to production specifications.
FLSA classification (typical)
Typically Non-exempt · Service, trades, or production work
Occupations in this SOC group are typically classified as Non-exempt and eligible for overtime pay under FLSA rules. Actual classification depends on the specific job duties, salary basis, and any applicable state or local rules. The current federal salary threshold for exemption is $684 per week ($35,568 per year), per the 2020 Department of Labor rule; the 2024 rule that would have raised the threshold was struck down by federal court in November 2024.
Pay outlook
Five-year pay outlook for this title
2026$67,000
2027$69,500
2028$72,000
2029$74,500
2030$77,000
2031$79,500
Projection assumes market wages keep rising about 3.5% a year, consistent with recent wage growth measured by the BLS Employment Cost Index. It reflects market movement for the title, not individual raises or promotions, which vary.
Get your Personal Pay Report for Maintenance Workers, Machinery
Keep your market comparison in a print-ready PDF, with negotiation targets, a script using your numbers, and a five-year market-pay illustration. Career ladder where available.
StateYears of experienceCurrent salary
One-time purchase. Review the final total, including any applicable tax, in Stripe before you pay. Report available immediately after successful payment. Full refund on request within 7 days of purchase. Refund terms. Prefer to explore first? Run a free market check.
Sources and assumptions
Modeled market estimate, aged to 2026. Underlying source families are BLS OEWS May 2025 for BLS-mapped occupations and the 2018–19 collection for corporate titles. Annual aging is compounded at approximately 3–4%; geographic, industry and company-size repricing are modeled. See the role details and methodology for the applicable source and assumptions.
Your free market check includes an estimated percentile and pay gap when you enter your salary. The paid report adds a PDF, negotiation targets and script, and a five-year market-pay illustration. See a full sample report
Maintenance Workers, Machinery pays 1% above the average across 52 roles in the Installation, Maintenance, and Repair job family (family average $66,500).
Similar-paying roles in Installation, Maintenance, and Repair
Related occupations from O*NET OnLine, U.S. Department of Labor.
New Hampshire salary questions
How much does a Maintenance Workers, Machinery make in New Hampshire?
The average base salary for a Maintenance Workers, Machinery in New Hampshire is $73,000 per year, or about $35.10 per hour, on WePayFairly's 2026 basis.
What is the median Maintenance Workers, Machinery salary in New Hampshire?
The median is $80,000 per year on the same 2026 basis. The median is the middle wage in the state distribution; the average is $73,000.
What is the typical Maintenance Workers, Machinery salary range in New Hampshire?
The 25th-to-75th-percentile range in New Hampshire is $61,500 to $87,000 per year on the 2026 basis. These percentiles describe the state wage distribution; individual pay varies by employer and experience.
How does Maintenance Workers, Machinery pay in New Hampshire compare with the national average?
The New Hampshire average of $73,000 is $6,000 (9.0%) above the national average of $67,000. Both figures use WePayFairly's 2026 basis.
Where do these New Hampshire salary figures come from?
The state figures come from BLS Occupational Employment and Wage Statistics state data. WePayFairly applies the same compounded market movement factor used elsewhere on this page to express the published figures on a 2026 basis. They are estimates, not a guarantee of a particular offer.
Need a defensible market price for this role? WePayFairly data is compiled from published survey sources and maintained by compensation professionals.
Need Maintenance Workers, Machinery pay benchmarked for your organization, or defensible compensation analysis for a dispute or valuation? Grahall builds it from primary sources, backed by an expert who testifies.
